Ohlapen stenske zastave

vertical_align_bottom Tehni?ne specifikacije
  1. Vnesite meritve
    • metri
    • metri
    OPOZORILO: Zastava ali transparent ima na sredini všite spoje.
    OBVESTILO: Površina ne sme biti ve?ja od 144 kvadratnih metrov.
    Text sizes overflow
  2. Izberite koli?ino
  3. Izberite možnost za pritrditev oblikovanja
    Naložite svojo zasnovo
    vertical_align_bottom Predloga vertical_align_bottom Navodila za oblikovanje
  4. Cene (Brezpla?en prevoz)

    Cene so na voljo izklju?no za registrirane distributerje

Ohlapen stenske zastave

Pravokotna zastava je izdelana vodoravno z dvema črnima obročema na levi strani za enostavno namestitev na več lokacij.

Narejen je iz 100-odstotnega poliestra 115 g/m² (primeren za notranjo in zunanjo uporabo).

Širino in višino lahko izberete glede na potrebne mere.

Priporočena velikost: 1,50 x 1 meter.

Največje dimenzije

Največja površina zastave ne sme presegati 144 kvadratnih metrov.

Spoji šivov

Če je zastava širša in višja od 1,55 metra, mora imeti na sredini všite spoje. Če presega to mero le v eni od dveh dimenzij, mora biti brez šivov.

Tekstilno površino zastave je mogoče prilagoditi z barvami in/ali vzorci po vaši izbiri.

Zasnovana je kot zastava ustanove, vendar jo lahko uporabite tudi za druge namene.

* Ta izdelek je lahko opremljen s personaliziranimi nalepkami.

Features

Description

Materials

The flag can be made with:

 

- Fabric is 100% polyester with a weight of 115 g/m². Weave: 50% weft and 50% warp with a 3-thread mesh.

- Fabric made of 130 g/m² satin fabric, specially designed for indoor use.

 

Hardened plastic rings.

Finishes and sewing:

It has two black rings on the left side for easy attachment.

 

In addition, the flag has the following construction:

 

  • Sewn in double backstitch with special outdoor thread.
 

  •  Double hem, 10 mm width.

  •  7 mm symmetrical double stitch (1.5 mm from the edges).
 

  • Stitch width: 5 mm.

Seam splices

If the flag exceeds 1,55 metres in width and height, it shall have splices sewn in the middle. If it only exceeds this measurement in one of the two dimensions, it shall be without splices.

Measures

Customisable width and height.

Maximum dimensions

The maximum area of the flag may not exceed 144 square metres.

Colour and design

Customisable colours and designs.

Printing

The flag is printed on one side with official inks in CMYK colours by dye sublimation “inkject”.

 

The 100% polyester 115 g/m² fabric has a colour transfer of approx. 96%.

Weight

Variable. Dependant on dimensions. Weight: 115 g/m² (polyester fabric).

Mast and bases

Flagpole and base not included.

 

Recommended:

 

- Office flagpole.

 

- Institutional mast.

 

- Wall mast.

Uses

It can be used as an institutional flag. However, it can be used for any number of purposes.

 

The flag made of 115 g/m² polyester fabric can be displayed outdoors and indoors.