Single flag for the wall base

vertical_align_bottom Data sheet
  1. Enter the measurements
    • meters
    • meters
    NOTICE: The flag or banner will have splices sewn in the middle.
    NOTICE: The area cannot be larger than 144 square metres.
    Text sizes overflow
  2. Quantity
  3. Choose an option for attaching your design
    Upload your design
    vertical_align_bottom PDF Template vertical_align_bottom Instructions
  4. Prices (free shipping)

    Prices available exclusively for registered distributors

Single flag for the wall base

Rectangular flag made horizontally with two black rings on the left for easy placement in multiple locations. 

It is made of 100% polyester fabric of 115 g/m² (suitable for indoor and outdoor use).

You can select the width and height according to the measurements you need.

Recommended size: 1.50 x 1 metre.

Maximum dimensions

The maximum area of the flag may not exceed 144 square metres.

Seam splices

If the flag exceeds 1,55 metres in width and height, it shall have splices sewn in the middle. If it only exceeds this measurement in one of the two dimensions, it shall be without splices.

The textile surface of the flag can be customised with colours and/or designs of your choice.

* This product can feature personalised labels.

Designed to be used as an institutional flag, you can use it for other purposes.

Features

Description

Materials

The flag can be made with:

 

- Fabric is 100% polyester with a weight of 115 g/m². Weave: 50% weft and 50% warp with a 3-thread mesh.

- Fabric made of 130 g/m² satin fabric, specially designed for indoor use.

 

Hardened plastic rings.

Finishes and sewing:

It has two black rings on the left side for easy attachment.

 

In addition, the flag has the following construction:

 

  • Sewn in double backstitch with special outdoor thread.
 

  •  Double hem, 10 mm width.

  •  7 mm symmetrical double stitch (1.5 mm from the edges).
 

  • Stitch width: 5 mm.

Seam splices

If the flag exceeds 1,55 metres in width and height, it shall have splices sewn in the middle. If it only exceeds this measurement in one of the two dimensions, it shall be without splices.

Measures

Customisable width and height.

Maximum dimensions

The maximum area of the flag may not exceed 144 square metres.

Colour and design

Customisable colours and designs.

Printing

The flag is printed on one side with official inks in CMYK colours by dye sublimation “inkject”.

 

The 100% polyester 115 g/m² fabric has a colour transfer of approx. 96%.

Weight

Variable. Dependant on dimensions. Weight: 115 g/m² (polyester fabric).

Mast and bases

Flagpole and base not included.

 

Recommended:

 

- Office flagpole.

 

- Institutional mast.

 

- Wall mast.

Uses

It can be used as an institutional flag. However, it can be used for any number of purposes.

 

The flag made of 115 g/m² polyester fabric can be displayed outdoors and indoors.