Telescopic flagpole and flag pack

vertical_align_bottom Data sheet
  1. Quantity
  2. Choose an option for attaching your design
    Upload your design
    vertical_align_bottom PDF Template vertical_align_bottom Instructions
  3. Prices (free shipping)

    Prices available exclusively for registered distributors

Telescopic flagpole and flag pack

Our telescopic flag poles are suitable for vertical banners. They have a flag arm that holds the unfurled advertising banner. They are economical and easy to handle as they can be folded for transport. They include a base and four reinforcements to increase their stability. Due to its height, the flag can offer a large vertical surface for the design you want to print.

Pack Content

Complete pack of the telescopic flagpole with flag, including everything necessary for installation and assembly.

  • Printed flag. Fabric 100% polyester 115 g/m².
  • Height adjustable telescopic flagpole.
  • Base made of hard plastic.
  • Accessories and finishes for easy attachment of the flag to the flagpole.
  • Transport bag not included.

Pack Dimensions

Flag

It measures 3 metres long and 1.20 metres wide, offering an impressive display of your colours and designs. With a reinforcement sleeve and four eyelets at the top, along with another reinforcement sleeve and eight eyelets on the left side, we guarantee strength and easy hanging.

Flagpole

The height adjustable telescopic flagpole of 5 to 7 metres with 4 sections, to raise your message to maximum impact. 

Base

Square base with rounded edges, 70 cm long, 70 cm wide and 20 cm high, refillable with water or sand. It has a capacity of up to 70 litres. 

Complementary products

Our accessories and finishes make tying your flag easy. We include 4 small plastic double rings to secure the flag to the upper power arm, and 8 large double rings for perfect attachment to the telescopic side pole.

Accessories for the Pack

If you prefer to buy the components separately, we offer flexible options. Purchase the  water base for more versatility, or print new flags with new designs and make use of the other parts. You can also get telescopic flagpole  separately for even greater visibility.

In addition, we recommend our case for telescopic flagpole and water base. Ideal for storing the telescopic pack disassembled or for easy transport.

* This product can feature personalised labels.

Features

Description

Materials

Flag:

 

100% polyester fabric 115 g/m². Weaving: 50% warp and 50% weft - 3-thread weaves.

 

Metal eyelets.

 

Mast and flag arm: made of aluminium.

 

Base: made of hard plastic.

 

Finishes and accessories: made of PVC.

Finishes

Vertical flag:

 

Without sleeve.

 

Reinforcing tape and 4 eyelets on the upper side.

 

It has a reinforced strip and 8 eyelets on the left-hand side.

 

In addition, the flag has the following stitching:

 

- Sewn in double backstitch with special outdoor thread.

- Double fold hem, 10 mm wide.

- Symmetrical 7 mm double stitching (1.5 mm from edges).

- Stitch width: 5 mm.

 

The flag arm (horizontal section) is a single aluminium section.

 

It has 4 reinforcement sections that are connected to the base and the main mast to reinforce the stability of the assembly.

 

A square base with rounded edges that can be filled with water or sand.

 

Accessories and finishes to facilitate attaching the flag to the flagpole: 4 small double plastic rings for attaching the flag to the upper flag arm, and 8 large double rings for attaching the flag to the main telescopic flagpole.

Measurements

Printed flag 3 metres high and 1.20 metres wide.

 

Main telescopic flagpole:

 

Height: Adjustable from 5 to 7 metres.

Height when collapsed: 2.2 metres.

 

Diameter:

 

- 5.5 cm for the segment closest to the base.

- 3 cm at the top.

- Flag arm (horizontal segment) that is 1.25 m long and has a diameter of 2 cm.

 

Base: 70 cm long, 70 cm wide and 20 cm high.

 

Large double ring: Largest outside diameter: approx. 6 cm.

 

Smaller diameter: 2.5 cm.

 

Small double ring: Outer diameters: approx. 2.5 cm.

 

Eyelets of 1 cm inner diameter.

Colours and designs

Flag: customisable colours and designs.

 

Colour of flagpole: matte silver grey.

 

Accessories and finishes: blue / light grey, depending on availability.

 

Base colour: dark grey.

 

Eyelets: gold-plated

Printing

Inkjet sublimation printing in CMYK (four-colour process) on one side with 96% approx. colour transfer using official inks.

Weight

Total pack weight: approx. 8.5 kg. (empty).

 

- Flag: less than 1 kg.

 

- Main flagpole, flag arm and bracing sections: 4 kg overall.

 

- Base: 4 kg (empty) Refillable to 70 litres.

Uses
  • For both indoor and outdoor use.
 

  • Stands out for the simplicity of its assembly (less than 5 minutes) and its ease of transport.

Complements not included

Telescopic flagpole and base cases.