Types of fabric

Check all the information about the fabric and printing characteristics.

Flag Fabric

Lightweight and dynamic, the 100% polyester flag fabric weighs about 115 g/m², which makes it easy to fly the flag.

The fabric has a colour transfer of 96%.

Dye sublimation "inkjet" printing in CMYK colours (four-colour process).

50% weft and 50% warp and 3-thread mesh.

Air permeability: >2050 l/m².

Tolerance in dimensions: +/- 5%.

Shrinkage when washing at 40ºC: Length: -1,5% Width: -1%.

Ideal for manufacturing Fly Banners, flags and banners with different product finishes.

Only if necessary, for the washing and ironing of the banner fabric, it is recommended:

  • Wash with a short, cold programme.
  • Use a protective cloth before ironing carefully and at low temperature.

Waterproof Fabric

100% polyester waterproof fabric, 250 g/m².

50% weft and 50% warp and 3-thread mesh.

Double stitched seams.

Double hem with 10 mm width.

7 mm symmetrical double stitching (1.5 mm from edges).

Stitch width: 5 mm.

UV printing cured and dried on one side with official inks.

Water and UV resistant, making it ideal for products such as Tents, Photocalls, Banners and others.

Washing and ironing of the waterproof fabric not recommended

Satin Fabric

130 g/m² satin fabric, especially for indoor use.

Its soft feel allows the flag to drape elegantly, making it ideal for products such as Office flags.

Dye sublimation "inkjet" printing in CMYK colours (four-colour process) on one side.

Weaving: 50% weft and 50% warp and 3-thread mesh.

Double stitching.

Double hem with a width of 10 mm.

7 mm symmetrical double stitching (1.5 mm from the edges).

Stitch width: 5 mm.

Frontlit Canvas

510 g/m² Frontlit Canvas, made of PVC.

It is water and air resistant. Fully customisable with any design.

The printing is done in UV cured and dried, one side, with official inks.

Ideal for advertising banners and X banners, both with a similar finish, with aluminium eyelets in the corners or where appropriate. Seamless.

Pet Banner

340 g/m² advertising media. This is a plastic display, not textile.

The banner is 100% opaque, with the chosen print on one side and grey on the reverse.

Colourfast and washable

Water and air resistant.

UV printing cured and dried  on one side with official inks.

This is the fabric used for the Roll Up. Seamless.

Blackback

Made of 100% polyester 260 g/m². This is the fabric used to manufacture the Double Sided Fly Banner.

The two sides of the Fly Banner are sewn together facing each other to achieve 100% opacity, allowing both designs to show clearly.

UV cured and dried printing on one side with official inks.