|
Features |
Description |
|
Dimensions |
Vertical flag with customisable dimensions. Maximum dimensions The maximum area of the flag may not exceed 144 square metres. |
|
Finishing and sewing |
Pod The sheath of the flag is made according to the width of the product. Closed sleeve at top and bottom. Reinforcement tape and eyelets and ties on the left side every 100cm. Eyelet 1cm inside diameter. |
|
Composition |
- Fabric: 100% polyester 115 g/m².
- Weave: 50% weft and 50% warp and 3-thread mesh.
- Double stitched seams.
- Double hem with 10 mm width.
- 7 mm symmetrical double stitching (1.5 mm from edges).
- Stitch width: 5 mm Seam splices If the flag exceeds 1,55 metres in width and height, it shall have splices sewn in the middle. If it only exceeds this measurement in one of the two dimensions, it shall be without splices. |
|
Printing |
Single-sided printing with official inks, in CMYK colours by "inkject" sublimation, with a colour transfer of 96%. |
|
Colour |
Customisable, as are the designs. |
|
Weight |
Depending on size, with a grammage of approx. 115 g/m². |
|
Poles and bases |
Mast and base not included. Recommended:
- Telescopic mast 7 metres (Base and mast pack). - Aluminium mast with base included. |
|
Uses |
Outdoor and indoor use. |
We manufacture and deliver in 24 hours
Exclusively to sign makers and distributors
Our prices are so low because we sell 100% online
Flag with eyelets and sleeves
Flag with eyelets and sleeves
Rectangular flag made vertically in polyester fabric. It has sleeves of your choice (closed at the top, to which you can add an open one at the bottom), reinforcement tape and eyelets on the left side every 100 cm, making it easy to install. Due to its composition, it can be used both indoors and outdoors. They are usually placed on high masts, so they are completely unfolded showing the message to be communicated in its entirety.
Content
- Flag, made of 100% polyester fabric, 115 g/m², water and air resistant.
- Pole and base not included, pole and base must be purchased separately.
Consult our mast available for flags with eyelets and sleeves.
Size Flag with eyelets and sleeves
Vertical flag with customisable variable dimensions.
Maximum dimensions
The maximum area of the flag may not exceed 144 square metres.
Seam splices
If the flag exceeds 1,55 metres in width and height, it shall have splices sewn in the middle. If it only exceeds this measurement in one of the two dimensions, it shall be without splices.
It also comes with a generic sleeve made for a 4.5 cm diameter power arm.
Flag Accessories
If you would like to complement the single flag with the available accessories, you can consult the masts including bases and print new flags with new designs.
You can buy our single flag with eyelets and sleeves so cheap because we sell it 100% online exclusively to sign makers and distributors and your customer can have it the next day because we manufacture and deliver it in 24h.
* This product can feature personalised labels.