Flag with eyelets

vertical_align_bottom Data sheet
  1. Choose the distance between eyelets
    Eyelets every 100CM
    Eyelets every 50CM
  2. Enter the measurements
    • meters
    • meters
    NOTICE: The flag or banner will have splices sewn in the middle.
    NOTICE: The area cannot be larger than 144 square metres.
    Text sizes overflow
  3. Quantity
  5. Choose an option for attaching your design
    Upload your design
    vertical_align_bottom PDF Template vertical_align_bottom Instructions
  6. Prices (free shipping)

    Prices available exclusively for registered distributors

Flag with eyelets

Rectangular flag made of polyester fabric.

It has a perimeter reinforcement tape with eyelets every 50 cm or every 100 cm (your choice), which facilitate its installation and knotting on multiple surfaces. 

You can select the width and height according to the measurements you need.

Maximum dimensions

The maximum area of the flag may not exceed 144 square metres.

Seam splices

If the flag exceeds 1,55 metres in width and height, it shall have splices sewn in the middle. If it only exceeds this measurement in one of the two dimensions, it shall be without splices.

The textile surface of the flag can be customised with colours and/or designs of your choice.

Due to its composition, it can be used both indoors and outdoors.

* This product can feature personalised labels.

More information on the technical sheet.

Features

Description

Dimensions

Customisable sizes.

Finishes and sewing

It has a reinforcement tape around the perimeter of the flag and eyelets every 50 or 100 cm for easy knotting. 

 

The eyelets have an internal diameter of 1 cm.

Seam splices

If the flag exceeds 1,55 metres in width and height, it shall have splices sewn in the middle. If it only exceeds this measurement in one of the two dimensions, it shall be without splices.

Measurements

- Customisable width and height.

 

- Eyelet spacing available: 50 or 100 cm.

 

- Eyelets of 1 cm inside diameter.

Customisable width and height.

Maximum dimensions

The maximum area of the flag may not exceed 144 square metres.

Colour and design

Customisable fabric colours and designs.

Gold coloured eyelets.

Printing

Single-sided printing with official inks, in CMYK colours by "inkject" sublimation, with a colour transfer of 96%.

Weight

According to measurements, with a grammage of 115 g/m².

Poles y bases

Pole and base not included.

 

Recommended:

 

- Telescopic mast 7 metres (Base and mast pack)

- Aluminium mast.

Uses

Outdoor and indoor use.